Typing with Jazz

I do my work using keyboards and I make music using keyboards. This clever web application brings it all together.

Making the step from being non-racist to being anti-racist

For decades, I’ve lived a sheltered life as a person whom MLK describes as

“the white moderate who is more devoted to “order” than to justice; who prefers a negative peace which is the absence of tension to a positive peace which is the presence of justice”

All this time, I stayed in my comfort zone and considered justice someone else’s problem, probably something the state needs to take care of via foreign aid or policy.

Just like it took meeting my wife for me to learn that protecting our environment starts with me as an individual changing my consumption behaviour, it took the BLM movement and the recent riots for me to understand that I as an individual can be an ally, can contribute to racial justice, can speak up against discrimination. That being non-racist isn’t enough, that I need to be anti-racist.

I have much to learn, and I am grateful for the many online communities that raise awareness, practice solidarity, and foster understanding in “non-racist” people like me.

DIRECT - The seven core topics of remote team communication

Pick any guide on remote work (oh, there are so many…) and it’ll tell you that communication is essential when you work in a distributed team. The problem is that it’s not obvious where exactly the centre of balance is between sharing too little and sharing too much. That’s why I’ve created a framework that uses a simple acronym to remind you of good opportunities to keep your distributed team in the loop.

You can watch it here or on YouTube. I’m already working on my next videos, so don’t forget to subscribe to my YouTube channel!

Weeknote 20/2020

Back in Azeroth I will certainly not remember the current World of Warcraft expansion “Battle for Azeroth” as my favourite one. After months of frustration with its storytelling, I stopped playing in February. I didn’t expect my exodus to last only three months, but I also didn’t anticipate that I’d be stuck at home for an eternity. So this week, I converted some of my in-game gold into play time and took my Tauren druid out of cold storage. With lowered expectations.

Wait, mouse buttons are cool? I’m a keyboard person. In the last few weeks, I’ve even put in extra effort to memorise as many useful keyboard shortcuts as possible. But plugging in my gaming mouse again gave me the idea to put its 12 side buttons to use in my work applications as well. So I went and mapped the keyboard combos I use most to the available extra buttons on my mice and trackballs (between which I rotate occasionally). Instead of running multiple ugly vendor applications like Razer Synapse and Logitech Options, I’m using Steermouse which I had already licensed for my Elecom trackball. I still try to keep my hands on the keyboard as much as possible, but when I do reach for the mouse, I can now make the most of it.

Goals for direction, time boxing for pace After discovering two weeks ago that a project had dropped off my radar, I made it my main priority to finally ship it. I put the project on my short-term goals list that I reference every morning. This kept it in my crosshairs. And every day, I reserved time for it in my calendar. That made sure I made continuous progress. This week, I deployed to production and published both the documentation update and the announcement blog post. It was a great feeling of achievement. Just like the great John “Hannibal” Smith, I love it when a plan comes together.

Finished my cyberdeck

GMK Night Runner, one of a few keycap sets I ordered last year, finally arrived, completing my cyberpunk-themed keyboard. The case is a Keyboardbelle Nouvelle limited edition. I used tactile T1 switches with 67g springs, lubed with Tribosys 3204. They’re mounted in a carbon-fibre plate over a hot-swap HS60 PCB.

Because the case is 3D-printed, it sounded a little bit hollow. I was able to mitigate that by putting a thin foam envelope (previously used for packaging a plate or PCB) into the bottom of the case.

I’m very happy with how nicely everything came together, especially how the CF plate lets a lot of the RGBs shine through.

I’ve created a gallery with a few more pictures.

How we schedule our days is how we spend our lives

“Scheduling is an invaluable tool for habit formation: it helps to eliminate decision making; it helps us make the most of our limited self-command; it helps us fight procrastination. Most important, perhaps, the Strategy of Scheduling helps us make time for the things that are most important to us. How we schedule our days is how we spend our lives.” (Gretchen Rubin, Better Than Before)

Cover letter > Resume

So we whittle the group of candidates down aggressively first. This means judging their cover letter and, to a far lesser extent, their resume.

Nice to get confirmation that great teams like Basecamp take the same approach as I.

-> m.signalvnoise.com/hiring-pr…

vimified

Despite working on a Mac, I’m using the mouse/trackball less and less. I’ve installed Vimium in my Brave browser; it allows me to follow links by selecting them with easy-to-type letter combinations.

I’ve also programmed my keyboards to send arrow keys when I hold the space bar and press the H, J, K and L keys. That way, I can move the cursor and scroll a page without even leaving the home row with my fingers.

My Daily Bootup checklist

With such a huge number of people suddenly thrust into working from home, I thought I’d share a bit of my experience (more than 10 years, actually) with doing Remote Work. I started a new morning livestream called “The Daily Bootup”. It’s named after the checklist I use to start every workday. This checklist helps me keep track of my goals and to-dos, especially my most important tasks (aka “MIT”). This is how it looks like:

• Check my calendar for the day
• Check my weekly goals
• Check my to-do list
• Check other sources of work
• Schedule my MIT
• Write a 5-Minute Journal entry
• Send a team check-in

Let’s take a look at each checklist item in detail!

Check my calendar for the day

Before I can start planning my work for the day, I have to get a feel for how much of the day is already predetermined by appointments and repeating events. That’s why I first check my calendar.

Check my weekly goals

I use weekly goals to guide my focus. On Mondays, I define one or two important results I’d like to achieve by the end of the week. Every other weekday, I reference this definition (which I share with my team on Basecamp) to keep me on track.

Check my to-do list

Unfortunately, I’m still living in a world in which there are tasks that I have to do no matter what, and deadlines that I haven’t set myself. My to-do list helps preventing them from falling by the wayside.

Check other sources of work

On top of my primary to-do list, there are other systems that tell me things that need to be pushed forward. Sales deals in our CRM and incident follow-ups are only two examples.

Schedule my MIT

At this point, it’s finally time to define today’s work by entering tasks into my calendar. For me, a time boxing approach has been working best to make sure that I put in the work to get the important things done in time.

Write a 5-Minute Journal entry

Many people recommend picking up journaling as a daily practice for reflection and recording one’s thoughts and feelings. Instead of doing free form writing, I have a 5-Minute-Journal template in Day One that asks me three things every morning: “What are you grateful for?”, “What would make today great?” and “What’s your daily affirmation?”

In my experience, a gratitude journal is a great way to keep myself on the positive side of things. Listing the things that are good in my life takes effect while I’m writing them down, and again when I read these entries two weeks or many years later.

Send a team check-in

As the final step in my morning routine, I submit a form that our team uses to tell everyone what to expect of ourselves today. It does so on multiple levels because it lets us not only enter our main goal for the day but also our mood and additional information that might be helpful for dealing with us. I haven’t yet tried to analyse the data. For now, it’s just nice to quickly see who’s feeling excited and who’s already tired at breakfast time.

So that’s my Daily Bootup routine! Let me know on Twitter or micro.blog what you think of it. Or how about you drop by on Full Stack Live? I do “The Daily Bootup” weekdays from 9:30am to 10am (Ireland/UK time) and would love to have a chat!

Weeknote 13/2020

Learning JavaScript

While I’ve learned more than a dozen different programming languages in my three decades of using computers, I’ve been focusing on Ruby for the last one. At my company, we automate our hosting infrastructure with Chef, we build our websites with Rails or Jekyll, and even for more complex command line scripts, Ruby has replaced Bash for us. But lately, I’ve actually added another programming language to my roster that I wanted to learn for years: Javascript. With StimulusJS, it was really easy to add a bit of client-side logic to our hosting dashboard. There’s a lot to learn and I’m really looking forward to doing more frontend development!

Icons for everything

Talking about frontend: Iconography is an important part of every user interface nowadays. Of course, the internet offers endless supply of icons but many of these collections are of low quality, have unclear licensing policies or are of a quality that doesn’t justify their price. Discovering the Noun Project has solved this problem for me completely. I’ve started using their icons on web sites, in my talk slides and even to give my Stream Deck a more consistent look:

Live stream for remote workers

With so many more people now working from home (and struggling with the change), I thought I’d share my 10 years of experience with remote work. I’ve started doing a 30-minute live stream over on my live coding channel every morning at 9:30am (10:30 on the continent) where I chat with viewers about how to make remote work… work. The stream is titled “The Daily Bootup”. How about you join me Monday morning and we start the day together? Simply click “Follow” to get a notification when we start!

Managing multiple Git identities

I’ve always been struggling to use the right name and email address, separate between work and personal projects, for each of my Git repositories. Micah Henning solved that problem nicely by removing the global settings but making a repo-specific configuration mandatory. And a handy alias is the icing on the Git identity selection cake.

The Live Coders Conference

There won’t be many conferences in the next few weeks, at least not the sort that you need to attend in person. However, with COVID-19 handing out lemons, people start to discover the lemonade of online conferences!

I’m happy to be part of an initiative by The Live Coders, a community of people broadcasting their software development on Twitch. On 9th April, we’re going to broadcast more than 12 hours of presentations on a wide range of topics. With my talk about burnout prevention, I’m probably going to have a slot in the (European) afternoon.

For details, check out The Live Coders Conference. Andy, one of the organisers, also did a write-up on Setting up an online conference.

It lives!

Reading with the sun in my back.

When terminals were real tty’s

For my first Retro Saturday live stream, I chose working with a PDP-11 minicomputer. I don’t own a PDP-11, nor can I afford to buy or run one, but I can simulate one realistically usingsimh, the simulator for historic computer systems.

After successfully installing Unix V7, the original Unix operating system from 1979, I ran into unexpected issues with entering source code. One of the problems was the lack of a full-screen editor combined with my lack of ed skills. Another problem was that the Backspace key didn’t work as expected; an issue I first encountered 27 years ago trying out an early version of Linux. And then there was the strange behaviour that I had to escape the number sign at the beginning of #include <stdio.h> with a backslash; otherwise it would disappear.

After the stream, I found out what the problem was: V7 was simply still geared towards being operated from a teletype, basically a typewriter with a serial port. (It would take many years until typewriters actually came with correction ribbons that enabled you to erase and overwrite. But by that time, teletypes had been replaced by serial terminals with CRT screens.)

On an input device that prints each character you type immediately on paper, it’s impossible to do what Backspace does. That’s why the Unix developers assigned special meaning to the # and @ signs.

The # sign tells the V7 shell to ignore the previously typed character. Correcting a typo would look like this: cat memp#o.txt.

For larger errors, there’s the @ sign. It tells the shell to ignore everything before it. For example: rm mem@mv memo.txt memo.bak.

Exploring historic operating systems has become a passion for me lately. Not only do I learn a lot about early computing technology. It also makes me appreciate so much more the achievements of pioneers like Thompson and Richie who didn’t have any of the conveniences software developers enjoy today.

2.11BSD seems to be a more user-friendly OS for the PDP-11, so that’s what I’m going to try next!

Supporting UDUMASS

I’d like us to start gathering funds to have the uncensored version played every day on every major TV station and streaming service.

VAX on, VAX off

In “geewiz explores computer history” news, I’m now an official member of DECUS, the Digital Equipment Corporation User Society! The reason is that HP (who bought Compaq who bought DEC) issue a Hobbyist License to DECUS members who’d like to install OpenVMS for funsies. And I have to admit, working with an old-school operating system that isn’t unixoid has been a great experience so far. I’ll do a live installation of OpenVMS on my Twitch stream tomorrow.

☑️ Go full coffee hipster

Weeknote 8/2020

As I’m pretty much Epoch years old, I celebrated a special birthday this week. It’s interesting in this context that my interest in historic computer systems has never been higher. I want that PiDP11 so hard. I’ve just applied for a hobbyist OpenVMS license. And on my live stream today, I installed the ancient Unix V7 from a virtual tape.

I mentioned in my last weeknote that I was trying out Brain.fm to put focus-improving background noise into my head. During one of my uses, its selection page for choosing a style of music made me remember another familiar page: the “Music” page that Calm added to their mindfulness app last year (I think?). While I’ve been using Calm for meditation for years, I’ve been using its music feature only for falling asleep easier. But since there’s also a “Focus” section, I won’t need to add another music app to my already long list of subscriptions.

That list still did get a new entry recently, though. Despite the fact that I’m fortunate in that I don’t have to schedule many meetings and calls, my calendar is one of my most important productivity tools. Most of the entries there are appointments with myself that I schedule every morning. By time-boxing my most important tasks for the day, I make sure that I actually have the time to get them done. That’s why I’m among the first subscribers of Fantastical 3 Premium, my calendar app of choice on all my devices.

My usual table at Starbucks where I sit to plan my day in the morning has a raised platform in the middle. Because of its more ergonomic height, it’s the ideal place for my iPad. The downside: It makes touching the screen inconvenient because I have to lean in and reach out with my arm. Even though there are people who started using a mouse as soon as iPadOS 13 came out, I dismissed the iPad’s mouse support because it was “only an accessibility feature”. Now that I finally decided to try connecting a Logitech Master Anywhere mouse, I am wondering how many times my “doing it the proper way” has been getting in the way of actual improvement already. Setting up the mouse (with all its 5 buttons, no driver installation necessary) took 2 minutes and it’s working perfectly. I can tap things easily, and with just a single click, I can go back to the home screen, switch to a different app or display the control center. With the iPad, the Happy Hacking Keyboard and the new mouse, I think I’ve found my mobile work endgame.

Josh Wood’s article resonates a lot with me. I’ve chosen a humble amount of “fuck-that money” over the chance of getting lots of “fuck-you money”. www.honeybadger.io/blog/f-ck…

An easy and secure way to launch helper scripts in a project

On one of my recent live coding streams, a viewer asked what my abe script does. I showed that it simply launched a Ruby command in my project’s application container. Since I’m using Docker Compose to spin up most of my development environments, I have to run all development tasks within the application container. Typing abe rake test is much faster than typing docker-compose exec app bundle exec rake test, so I added this script to my project’s bin directory:

#!/bin/bash
docker-compose exec app bundle exec $@

It’s a nifty time-saver, but the smart part of this isn’t the script itself but how I make helper scripts in the bin directory of my projects easy to launch without having to prepend every command with ./bin/.

If you’re familiar with how a Unix shell finds the right program to execute, you ’ll probably suggest just adding ./bin to the environment variable PATH. But that’s a risky move because you don’t want to accidentally launch a malicious script after checking out a repository that happens to have an executable ls command in its bin directory.

Once again, it was the talented devs over at ThoughtBot who found a better solution. Instead of adding ./bin to PATH, they recommend adding .git/safe/../../bin. With this entry, the shell descends into .git, further down into safe, all the way back to the repository root and only then into bin. What makes this seemingly roundabout way to find your helper scripts secure is that it only works if you’ve first manually created the subdirectory safe within .git. The latter is, after all, git’s data directory which normally doesn’t contain a directory named safe.

There you have it — easy access to your project’s helper scripts is simple to achieve. And without any additional effort, it’s safe as well!

I’ve been using DuckDuckGo as my default search engine for a while. TIL that DuckDuckGo also has practical shortcuts called bangs for searching on a specific site.

Weeknote 4/2020

In my experience, the value of getting enough sleep can not be overstated. I feel like I got more work done on Tuesday alone than in the entire previous week. And the main difference was that I started last week already tired and didn’t get enough rest to change my state until the weekend. I highly recommend the Focused podcast on this topic. Apart from discussing sleep schedules and good tactics, it also briefly mentions taking sleep headphones on trips. I have some of these in my nightstand but it never occurred to me that they could save me from lying in a hotel bed frustrated by noise outside again.

And on the topic of focus, I’m trying out two apps that might help me maintain it: One is Freedom for making sure my Pomorodo sessions are distraction-free, and the other is Brain.fm for creating a neutral work soundtrack.

After two weeks with the HHKB Hybrid, I can report that it’s a great travel keyboard. Typing feel and sound is excellent, and its weight and plastic cover make it very portable.

My live coding stream is jugging along nicely. Having scheduled broadcasting times has put me into a steady pace of freistilbox dashboard development. Finishing at least one issue queue item each session is very satisfying. I also enjoy being a member of the burgeoning Live Coders community. It’s a small but diverse bunch of people who have visible fun sharing their expertise and helping each other. I’m looking forward to my next session this afternoon!

“Don’t use ZFS. It’s that simple.” www.realworldtech.com/forum/

Weeknote 3/2020

Lack of sleep was the theme that ran through this week. For various reasons, I didn’t get into bed early enough a single night. The immediate result of not having slept enough for me is a lack of focus. Even while writing this, I’m getting distracted by watching flocks of birds in the sky through my office window. I’ve successfully established my work routine after coming back from the holidays. I’ve also started a writing routine this week. Now it’s time to get back into a sleep routine.

The writing routine I’ve just mentioned is related to a goal I’ve set myself for this year: I want to write a beginners course for Ruby programmers with an accompanying video series. Having written a Perl programming book back in the day, I know that I have the necessary skills. But I also know how much time it takes to write a whole book. Therefore, what will make or break this project is taking the time to write. By scheduling writing time every time I plan my day in the morning, I’ve accomplished a few hours of writing this week already. It’s a good start, and it’s how I’d like to continue. If you’d like to follow along, I’m going to publish preliminary versions of the book on LeanPub and I’ll post a link here.

On the keyboard building side of things, I’ve finally received the HS60 PCB I had pre-ordered in September. I was pleasantly surprised by how well it was packaged. After all, unboxing stuff that is broken because of its flimsy packaging isn’t unknown to me. Unfortunately, the PCB is defective nonetheless. A few hours after taking delivery, I received an email apologising for a manufacturing error. A diode had been soldered on the wrong way, which renders the connected key switch unresponsive. Since the email also said that it’s okay if I try to resolve the issue myself (I can get a replacement in any case), I’m going to take a stab at replacing an SMD diode the size of a pin head this weekend. It’ll be a challenge for my shaking hands and deteriorating eyesight, but I do love challenges! Mad props to Mechboards for both their careful packaging and their transparent and hobbyist-friendly issue resolution!